Continued...
The bottom of the case was made from the same 1.5mm of carbon fibre, custom made; I didn't want to use a poor CF copy anywhere:
Front view, still no 'face'... let's go make it!
The mounted and coloured backside...
...and then covered up with a metal plate I bought. The second picture above shows you the finished view of the rear of the case.
The front!
The LCD on the top is from the 'Aquaero' I mentioned earlier. It's far more than a simple fan controller; it powers the two pumps in this case and analyzes the state of the flow control sensors. Underneath the Aquaero you can see a pair of Aquastream pump controllers - each has two status LED's in it.
In the middle of the front is a 'modpuk' controller HDD activity monitor.
Another view of the front, showing the DVD burner:
There's a hole for the Aquatube in the top of the case:
The bottom of the case was made from the same 1.5mm of carbon fibre, custom made; I didn't want to use a poor CF copy anywhere:
Front view, still no 'face'... let's go make it!
The mounted and coloured backside...
...and then covered up with a metal plate I bought. The second picture above shows you the finished view of the rear of the case.
The front!
The LCD on the top is from the 'Aquaero' I mentioned earlier. It's far more than a simple fan controller; it powers the two pumps in this case and analyzes the state of the flow control sensors. Underneath the Aquaero you can see a pair of Aquastream pump controllers - each has two status LED's in it.
In the middle of the front is a 'modpuk' controller HDD activity monitor.
Another view of the front, showing the DVD burner:
There's a hole for the Aquatube in the top of the case:
MSI MPG Velox 100R Chassis Review
October 14 2021 | 15:04
Want to comment? Please log in.